সরকারি যানবাহন অধিদপ্তরের আওতাধীন সরকারি যানবাহন মেরামত কারখানাকে আধুনিকায়ন করার লক্ষ্যে বিভিন্ন প্রকার আধুনিক যন্ত্রপাতি ক্রয় করা হয়েছে। যেমন-

Four Post Lift                          

 
Lifting Capacity    4 Ton       
Electric Motor Power    2.2 KW, 3 HP, 1440 rpm/3 Phase,, 415 V, 50 Hz       
Motor Brand    Bosch Rexroth/Brebini (Hydrapp), Itali       
Maximum Lifting Height    1800 mm       
Minimum Lifting Height    170 mm       
Lifting Time    40 Sec           
Overall Dimensions (LXWXH)     5205X3010X2235 mm       
Lube Tank    12 Ltr       
Air Pressure    8-10 bar    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

 

2. Two Post Lift

 
Type    Electro-hydraulic lift        
Lifting Capacity    4 Ton       
Electric Motor power    2.4 kw, 3 Phase       
Maximum Lifting Height    1900 mm       
Minimum Lifting Height    100 mm       
Lifting Time    55 Sec    

 

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
3. Wheel Aligner

 
Type    Focus 8 sensor        
Suitable for rim dia    12 to 24 inch       
Sensors    8 CCD       
Inclinometers     Digital 3D       
Measurement    Toe, Caster, Camber, Setback Thrust angle, SAI       
Power Source    230 V       
Maximum weight on turntable    600 Kgs       
Accessories    PC, Printer, Monitor, turntable, steering & brake lock etc.    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

Wheel Balancer (Videographic)
 
Type    Videographic       
Balancing accuracy     1 g       
Cycle time    4.7 sec (53/4 inch X 14 inch) 15 kg       
Rim Machine Distance    0 - 255 mm       
Maximum Power  consumption    0.65 Kw       
Rim Width Setting Range    1.5 - 10 inch or 40 - 510 mm       
Diameter Setting Range    10 - 30 inch or 265 - 765 mm       
Air Pressure    8 - 10 Kg/cm2       
Protection Class     IP 54       
Balancing Speed    100 rpm    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.                                                             
                               5. Brake Disk/Drum Cutting Machine
Specification:
Rotor Diameter        ：4—24〞（102—610mm）.
Rotor Thickness        ：2.85〞（73mm）.
Drum Diameter        ：6—24〞（152—711mm）.
Drum Depth        ：9〞（229mm）.

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

6.Injector Tester & Cleaner(EFI)
 
                       Type    Injector Tester & Cleaner        
Power Supply    220 V AC       
Power Consumption    200 W       
Injector Pressure Range    0 to 3.5 Bars       
Ultrasonic Frequency    40 KHz       
Selection of RPM    500 to 7000 RPM       
Selection of Injection Time    1 ms to 10 ms       
Maximum Number of Injection    6    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

12. Air Compressor (Screw Type)
 
Compressor Output     76 CFM Or 2.15m3/m       
Maximum pressure     10 bar       
No. Of stages    single       
Cooling System    Air Cooled       
Total power Consumption    15KW / 20HP is the motor capacity       
Power supply    415 / 380 v, 3 ph, 50 Hz       
Motor Power    15kw, TEFC, Squirrel cage Induction Motor, IP55, Class F insulation,        
Motor rpm    1460       
Fan Motor Power    1.1kw / 1.5HP       
Type of starter for main motor    Automatic Star- Delta       
Tank capacity    20Liters       
First fill quantity    10Liters ISO VG 68 grade oil / ELGI AIR LUBE       
Max air out let temp    Ambient + 10 deg C       
Dimensions LXBXH in mm    1475 x 800 x 1145       
Idle time power consumption     20-30 % of full load power       
Drive     Direct gear drive/ No belt losses/ Higher efficiency & low maintenance       
Control System    PLC Controlled       
Canopy    Powder coated panels, acoustically designed.    

Package: Air Dryer, Service Line Dust & Oil Removal, Vertical Air Receiver Tank.

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

 

 

 

 

 

13.Paint Booth (7 M)
 
Internal Length    7000 mm       
Internal Width    4000 mm       
Internal Height    2450 mm       
Door Height    2400 mm (additional single door, Model: 7M)       
Total Door Width    3000 mm       
Metal Basement    330 mm       
External Length    7120 mm       
External Width    4120 mm       
External Height    3345 mm       
Motor Power    10 HP       
Light Power    1296 W       
Thermic Power    1,80,000 Kcal/h       
Air Range    21000 m3/h       
Temperature (Drying mode)    80 Max deg.C    

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

14.Crash Repair System, Quick Bench (DT)
Feature:
 Quick Bench DT                    
1. Direct clamping no need to raise the vehicle        
2. Repairs minor and medium crashes            
3. Vertical pulling tower                    
4. Automatic locking pulling tower
5. Automatic height adjustment of bench for Inserting pulling tower

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
                                    15.Rapid Denter
Key Feature:
Spotter with 100% copper windings ensuring higher duty cycle for increased productivity.
Digital graphic LED display for easy operations.
Single side spot gun with various welding procedures like shrinking, washer welding, stud welding, wavy wire etc. are available.
Claw puller & quick puller for removing all types of dents.
High productivity since reduced time in removing individual parts of a car for repair.
Over heat protection.
Step less current regulation.

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

16. Pneumatic Polisher
 
Type    Pneumatic Polisher, S P Air, Japan       
Duty Status    Heavy        
Free Speed     2500 rpm       
Disc Dia    8 inch / 205 mm       
Weight    2.1 kg       
Air Inlet in NPTF    ¼  Inch        
Main Functions    Rubbing & Polishing    

 

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

 

17. Pneumatic Sander
 
Type    Duel Action Sander, S P Air, Japan       
Free speed     10000 rpm       
Orbit Dia    5 mm       
Pad or disc Dia    6 inch/150mm       
Net weight    1.26 kg       
Weight    2.58 kg       
Air Inlet in NPTF    ¼     

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

22. Infra Red Dryer

Strengths:
Short wave infra red technology
Automatic distance sensor
Led display
Digital power setting
Hydraulic lifter turning around 300 degree
Each lamps can be controlled separately

.
Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

7.Multi Scanner:
 
Including commissioning, training, fittings and electric connection.

8.Fully equipped Tools Trolley

 
FRL unit    Available    Detailed list of hand tools included       
PU coiled hose (4 Nos)    Available            
Clip board    Available            
Air blow gun    Available            
Hand tools    Available            
Battery hydrometer    Available            
Spark plug cleaner    Available            
Tyre pressure gauge    Available            
½ inch impact wrench    Available            
½ inch air ratchet     Available         

 

Including training, fittings and electric connections.
9.Battery Charger

Technical Specifications:

 
Input voltage    220V       
Output power    1.8/11KVA       
Recharging voltage    12/24V       
Average charging current    50A       
Charging effective current    75A       
Start power current    700A 0V       
Start current    460A 1V    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
10.AC Recovery Unit
 
Type    AC Refrigerant Management System       
Refrigerant Type    R134a       
Service Procedure     Semi Automatic or manual operation       
Vacuum Pump    92 lpm       
Recovery Speed    300 g/min       
Refrigerant bottle capacity    12 Kg       
Power supply    220 V 50 Hz    

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

11. Tyre Changer (Semi Auto)

 
Internal Rim clamping    12 -23 inch       
External Rim clamping    10 -20 inch       
Working pressure    8 – 10 bar       
Power supply    Single Phase       
Maximum wheel diameter    41 inch       
Maximum wheel width    3-15 inch       
Motor power    1.1 kw    

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

 

18. Plastic Repair Kit

Key Feature:
Repair massive plastic parts on an automobile very efficiently and effectively.

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

19. MIG-MAG Welder  

Specification:
Power supply        : 415V/3Ph/50Hz
Welding current range    : 15 to 220 A
Duty cycle at 35%    : 170 A
Wire size        : Solid 0.6/0.8 (1) cored 0.9mm
Wire feeder        : In-built

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

20. Plastic stapler Kit
Key Feature:
Repair massive plastic parts on an automobile very efficiently and effectively as stapler.

Including installation, commissioning, training, fittings, electric connections.
21. Hydraulic Kit (10 Ton)
Specification:
 
Capacity (Ton)    10 Ton       
Stroke (mm)    135       
Minimum height    358       
Packing style    Plastic Box       
Net weight (kg)    31    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

23. Hydraulic Shop Press (20 Ton)

 
Capacity    20 Ton       
Operation    Hydraulic       
Stroke    145 mm       
Working range    1035 mm    

 

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

 

24. Lathe Machine

 
Size    8 feet       
Dock Chuck    16 Inch       
Motor Power    3 HP       
Standard accessories     Available     

 

 

 

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.

 

 

 

 

 

 

 

Section 7.    Technical Specifications for Lot-01

The Goods and Related Services shall comply with following Technical Specifications:

 
Item No    Name of Item     Technical Specification and Standards       
1    2    3       
1    Four Post Lift    
Lifting Capacity    4 Ton       
Electric Motor Power    2.2 KW, 3 HP, 1440 rpm/3 Phase,, 415 V, 50 Hz       
Motor Brand    Bosch Rexroth/Brebini (Hydrapp), Itali       
Maximum Lifting Height    1800 mm       
Minimum Lifting Height    170 mm       
Lifting Time    40 Sec           
Overall Dimensions (LXWXH)     5205X3010X2235 mm       
Lube Tank    12 Ltr       
Air Pressure    8-10 bar    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
2    Two Post Lift    
Type    Electro-hydraulic lift        
Lifting Capacity    4 Ton       
Electric Motor power    2.4 kw, 3 Phase       
Maximum Lifting Height    1900 mm       
Minimum Lifting Height    100 mm       
Lifting Time    55 Sec    

 

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
3    Wheel Aligner    
Type    Focus 8 sensor        
Suitable for rim dia    12 to 24 inch       
Sensors    8 CCD       
Inclinometers     Digital 3D       
Measurement    Toe, Caster, Camber, Setback Thrust angle, SAI       
Power Source    230 V       
Maximum weight on turntable    600 Kgs       
Accessories    PC, Printer, Monitor, turntable, steering & brake lock etc.    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
4    Wheel Balancer (Videographic)
    
Type    Videographic       
Balancing accuracy     1 g       
Cycle time    4.7 sec (53/4 inch X 14 inch) 15 kg       
Rim Machine Distance    0 - 255 mm       
Maximum Power  consumption    0.65 Kw       
Rim Width Setting Range    1.5 - 10 inch or 40 - 510 mm       
Diameter Setting Range    10 - 30 inch or 265 - 765 mm       
Air Pressure    8 - 10 Kg/cm2       
Protection Class     IP 54       
Balancing Speed    100 rpm    

Advantages:
Automatic distance, diameter and width measurements
Function ALUS
Indication of exact correction weight position
Split control
Presetting the customer & user name
Manual mechanical brake by pedal control system

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.                  
5    Brake Disk/Drum Cutting Machine    Specification:
Rotor Diameter        ：4—24〞（102—610mm）.
Rotor Thickness        ：2.85〞（73mm）.
Drum Diameter        ：6—24〞（152—711mm）.
Drum Depth        ：9〞（229mm）.

Features:
● Work Lamp- A work lamp can keep your work piece lighted even in dark area
● Perfect Finish- The perfect finish meets or exceeds all OEM specifications
● High Efficiency - A convenient design allows to quickly change from rotor to drum
● Safe Work Area - A chip bin can keep your work area clean and safe
● Low Tool Board - A low board can put all adapters which you need
● Heavy Work Bench - The heavy work bench can reduce vibration and chatter ensure the smooth finish
● Single Pass - Positive rate tooling for optimum finish with a single pass
● Stop Switch -Two automatic shutoff switches make the motor of rotor and durm automatic stop after finishing

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
6    Injector Tester & Cleaner(EFI)    
 
Type    Injector Tester & Cleaner        
Power Supply    220 V AC       
Power Consumption    200 W       
Injector Pressure Range    0 to 3.5 Bars       
Ultrasonic Frequency    40 KHz       
Selection of RPM    500 to 7000 RPM       
Selection of Injection Time    1 ms to 10 ms       
Maximum Number of Injection    6    

Advantages:
Flow and equalizing test
Leakage test
Spray test
Ultrasonic cleaning and direct inject

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
7    Multi Scanner    
Including installation, commissioning, training, fittings and electric connection.       
8    Fully equipped Tools Trolley    
FRL unit    Available    Detailed list of hand tools included in page no.86       
PU coiled hose (4 Nos)    Available            
Clip board    Available            
Air blow gun    Available            
Hand tools    Available            
Battery hydrometer    Available            
Spark plug cleaner    Available            
Tyre pressure gauge    Available            
½ inch impact wrench    Available            
½ inch air ratchet     Available         
Advantages:
Provide the complete set of solution
Moveable when it is required
Safety lock system

Including commissioning, training, fittings and electric connections.       
9    Battery Charger    Features:
Single phase, quick charging and starting
Lead acid batteries
With protecting devices of excessive heat and overload
Normal charging and fast-speed charging for choice.

Technical Specifications:

 
Input voltage    220V       
Output power    1.8/11KVA       
Recharging voltage    12/24V       
Average charging current    50A       
Charging effective current    75A       
Start power current    700A 0V       
Start current    460A 1V    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
10    AC Recovery Unit    
Type    AC Refrigerant Management System       
Refrigerant Type    R134a       
Service Procedure     Semi Automatic or manual operation       
Vacuum Pump    92 lpm       
Recovery Speed    300 g/min       
Refrigerant bottle capacity    12 Kg       
Power supply    220 V 50 Hz    
Advantages:
Simplified operation
Password protection to prevent unauthorized usage
Increased productivity
Digital display
User friendly software
Service alarm
All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
11    Tyre Changer (Semi Auto)    
Internal Rim clamping    12 -23 inch       
External Rim clamping    10 -20 inch       
Working pressure    8 – 10 bar       
Power supply    Single Phase       
Maximum wheel diameter    41 inch       
Maximum wheel width    3-15 inch       
Motor power    1.1 kw    
Advantages:
Handle both standard and delicate alloy wheels.
Tilt back arm design in automatic machine.
All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
12    Air Compressor (Screw Type)    
Compressor Output     76 CFM Or 2.15m3/m       
Maximum pressure     10 bar       
No. Of stages    single       
Cooling System    Air Cooled       
Total power Consumption    15KW / 20HP is the motor capacity       
Power supply    415 / 380 v, 3 ph, 50 Hz       
Motor Power    15kw, TEFC, Squirrel cage Induction Motor, IP55, Class F insulation,        
Motor rpm    1460       
Fan Motor Power    1.1kw / 1.5HP       
Type of starter for main motor    Automatic Star- Delta       
Tank capacity    20Liters       
First fill quantity    10Liters ISO VG 68 grade oil / ELGI AIR LUBE       
Max air out let temp    Ambient + 10 deg C       
Dimensions LXBXH in mm    1475 x 800 x 1145       
Idle time power consumption     20-30 % of full load power       
Drive     Direct gear drive/ No belt losses/ Higher efficiency & low maintenance       
Control System    PLC Controlled       
Canopy    Powder coated panels, acoustically designed.    
Package: Air Dryer, Service Line Dust & Oil Removal, Vertical Air Receiver Tank.

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
13    Paint Booth (7 M)    
Internal Length    7000 mm       
Internal Width    4000 mm       
Internal Height    2450 mm       
Door Height    2400 mm (additional single door, Model: 7M)       
Total Door Width    3000 mm       
Metal Basement    330 mm       
External Length    7120 mm       
External Width    4120 mm       
External Height    3345 mm       
Motor Power    10 HP       
Light Power    1296 W       
Thermic Power    1,80,000 Kcal/h       
Air Range    21000 m3/h       
Temperature (Drying mode)    80 Max deg.C    
Advantages:
High thermal efficiency
Higher fuel efficiency during baking cycle
The thermal conductivity of PUF is as low as 0.02 W/m K.
Additional small door for more heat preservation

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
14    Crash Repair System, Quick Bench (DT)    Feature:
 Quick Bench DT                    
1. Direct clamping no need to raise the vehicle        
2. Repairs minor and medium crashes            
3. Vertical pulling tower                    
4. Automatic locking pulling tower
5. Automatic height adjustment of bench for Inserting pulling tower

Benefits:
Reduced repair time.
Reduced repair cost.
Improved quality of repair.
Reduced dependency on skilled man power.
All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
15    Rapid Denter    Key Feature:
Spotter with 100% copper windings ensuring higher duty cycle for increased productivity.
Digital graphic LED display for easy operations.
Single side spot gun with various welding procedures like shrinking, washer welding, stud welding, wavy wire etc. are available.
Claw puller & quick puller for removing all types of dents.
High productivity since reduced time in removing individual parts of a car for repair.
Over heat protection.
Step less current regulation.

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
16    Pneumatic Polisher    
Type    Pneumatic Polisher, S P Air, Japan       
Duty Status    Heavy        
Free Speed     2500 rpm       
Disc Dia    8 inch / 205 mm       
Weight    2.1 kg       
Air Inlet in NPTF    ¼  Inch        
Main Functions    Rubbing & Polishing    
Advantages:
Very easy to operation
Less man hour more earning
 Vibration free
Less Weight                         

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
17    Pneumatic Sander    
Type    Duel Action Sander, S P Air, Japan       
Free speed     10000 rpm       
Orbit Dia    5 mm       
Pad or disc Dia    6 inch/150mm       
Net weight    1.26 kg       
Weight    2.58 kg       
Air Inlet in NPTF    ¼     
Advantages:
Smooth handling
Very easy to operation
Less man hour more earning
Vibration free performance
Less Weight
All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
18    Plastic Repair Kit    Key Feature:
Repair massive plastic parts on an automobile very efficiently and effectively.

Benefits:
Lower investment and no more locking up of capital in spare parts.
More man-hour gained as well as  Time & Cost effective
Practical and functional & light weight.
Keeps the repairing area as small as possible, reduces repairing time and minimizes the cost.
Faster repairs, quicker deliveries and satisfied clients.

All prices including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
19    MIG-MAG Welder    Key Feature:
Wire feeder and cylinder stand are in built.
Top quality torch for perfect finish

Specification:
Power supply        : 415V/3Ph/50Hz
Welding current range    : 15 to 220 A
Duty cycle at 35%    : 170 A
Wire size        : Solid 0.6/0.8 (1) cored 0.9mm
Wire feeder        : In-built

Applications:
Welding of cut open body panels-either replacement or reworking
Parts can be butt together
Spot welding on areas where regular spot welder arms cannot be reached

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
20    Plastic stapler Kit    Key Feature:
Repair massive plastic parts on an automobile very efficiently and effectively as stapler.

Benefits:
Welder in case with staples – 230V
Adjustment of power setting for different hard plastics
Difference staples for reinforcing plastic
High profitability since avoid replacement by repairing plastic parts
Faster repairs, quicker deliveries and satisfied clients.

Including installation, commissioning, training, fittings, electric connections       
21    Hydraulic Kit (10 Ton)    Features:

A Jack for automobile repair, push, pull lift and exten in vertical and horizontal directions.
Including piton cylinder with 14 accessories
Widely used on repair of car & truck body, especially suit the work without power supply

 
Capacity (Ton)    10 Ton       
Stroke (mm)    135       
Minimum height    358       
Packing style    Plastic Box       
Net weight (kg)    31    

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.
       
22    Infra Red Dryer    Strengths:
Short wave infra red technology
Automatic distance sensor
Led display
Digital power setting
Hydraulic lifter turning around 300 degree
Each lamps can be controlled separately

Benefits:
Can try both putty & paint in 5 min & 10 min respectively
Automatic distance sensor ensures safety & quality of finish

.
Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
23    Hydraulic Shop Press (20 Ton)    
Capacity    20 Ton       
Operation    Hydraulic       
Stroke    145 mm       
Working range    1035 mm    
Advantages:
Heavy steel construction
2 heavy duty press plate
Adjustable table height faculty

Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.       
24    Lathe Machine    
Size    8 feet       
Dock Chuck    16 Inch       
Motor Power    3 HP       
Standard accessories     Available     
Advantages:
Heavy  construction
Lifelong duty
Actual measuring scale
One shop complete solutions
Including installation, commissioning, training, fittings, air connection, electric connection and required civil works.